- A+
Epson WF-5620 Firmware Recovery Mode
Epson WF-5620 is a high-end all-in-one inkjet printer from Epson. It features a 3.5” color LCD display, Wi-Fi and Ethernet connectivity, and advanced professional printing features. With a range of powerful features, the WF-5620 can be used for both home and office printing.
Unfortunately, like other printers, the WF-5620 can sometimes become locked up due to a variety of reasons, including incorrect firmware, errors while printing, or an unexpected power failure. If this happens, you can put your printer into recovery mode to try and restore it to its original factory settings.
It’s important to note that this process is potentially dangerous and should only be done by an experienced technician. There is always a risk that the recovery process may cause damage to your printer.
To put the WF-5620 into recovery mode, start by turning off the printer. Then, press and hold down the “Paper Feed” and “Cancel” buttons at the same time, then turn the printer back on while still holding down the buttons.
Continue to hold the buttons down until the LCD display shows “Service Mode”. Once you’re in service mode, the LCD will display a list of recovery options. The ones you’ll want to select are the “Initialize EEPROM” and “Initialize Firmware”.
These two options will reset the printer’s firmware to its original factory settings. Once you’ve done this, your printer should be back to normal.
Once you’ve put the WF-5620 into recovery mode, it’s important to remember that you’ll have to reinstall all of the printer’s software and drivers. These can be found on Epson’s website and you should follow their instructions for installation.
In addition, you may need to reset your printer’s settings to their original factory defaults. To do this, you’ll need to open the printer’s control panel and access the “Maintenance” tab. You can then select the “Reset” option to reset all of the printer’s settings.
To sum up, the WF-5620 can be put into recovery mode if it becomes locked up due to a variety of reasons. To do this, turn off the printer, then press and hold down the “Paper Feed” and “Cancel” buttons while turning the printer back on. In service mode, select the “Initialize EEPROM” and “Initialize Firmware” options to restore the printer’s firmware. Once you’ve done this, you’ll need to reinstall the printer’s software and drivers and reset the printer’s settings.
