- A+
Introduction
Epson PhotoTX650 is a multifunctional printer that is known for producing high-quality prints. However, over time, various issues may arise that require you to reset the printer to default settings. This article will guide you through the process of resetting Epson PhotoTX650 printer to default settings.
Resetting the Printer
Before resetting the printer, make sure that you have completed any printing tasks and turned off the printer. Once the printer is turned off, follow these steps to reset it to default settings:
Press and hold the Stop/Resume button on the printer for 5 seconds.
While still holding the button, press and hold the Power button. Hold both buttons for 3 to 5 seconds until the printer starts to reset.
Release both buttons at the same time.
The printer will start to reset. Wait for the process to complete.
After the reset process is complete, the printer's settings will return to default settings.
Resetting Network Settings
If you are resetting the printer to default settings because you want to connect it to a new network, you will need to reset the network settings as well. Follow these steps:
Press and hold the Wi-Fi button on the printer until the Wi-Fi light starts to blink.
Press the Stop/Resume button four times. The printer will print a network status sheet.
Look for the section that says "Connection," and find the name of the network that the printer is currently connected to.
Press and hold the Wi-Fi button on the printer for 3 seconds, then release it when the Wi-Fi light starts to blink.
Press the Wi-Fi button again when the light blinks for the second time. The network settings will start to reset.
Wait for the printer to finish resetting the network settings.
After resetting the network settings, you can connect the printer to a new network.
Conclusion
Resetting Epson PhotoTX650 printer to default settings can help resolve various issues. By following the steps outlined above, you can easily reset the printer to its default settings. Also, resetting the network settings can help you connect the printer to a new network.
Remember to turn off the printer before resetting it, and wait for the reset process to complete before turning it back on.
